Design and Production of High Quality R/C planes, since 2004
Our office is closed today to re-open Tuesday.

How to

  • Mod to fit the NXT servos by Shaun (Designer of PA planes)

    PA recently upgraded the servos that are included with the iPAs packages with better performance in mind. The NXT...

    0
  • 7

    Learn how to 3D! Beginner to Pro video series by Daniel Dominguez

    My name is Daniel Dominguez, and i have been involved with R/C for over 22 years, my passion has...

    0
  • 7

    PA Ultimate AMR 60 – Build videos

    Here are some excellent build videos for the Ultimate AMR 60 from our good customer Martin Sputz from germany!

    0
  • Basic setup Quick Guide R/C 3D Airplane

    Basic setup Quick Guide This Quick guide is an easy way to develop a standard setup procedure guaranteeing accurate...

    0
  • Top 10 R/C Flying Tips

     The following are the best tips I have compiled from many sources and contributors.   Many of these did not...

    1
  • 7

    Precision Aerobatics How to Build Series by Hans Kahlert

    Episode 1:   Introduction   Episode 2:   In this Episode of PA Builds Hans’ covers servo installation and...

    1
  • 7

    How to Modify the Thrust 10 to Thrust 40 Motor for Back Mounting

    Overview Thrust motors can be modified for back mount operations if needed. Items required are as follows:- Stepped Wheel...

    1
  • 7

    How to Remove and Re-install the Thrust Motor Shaft

    Here are the step by step pictures on how to remove and replace the motor shaft. Tools required in...

    1
  • 7

    How to Fix Landing Gear Mount after a Hard Landing

    You will need the following: 30 minute epoxy Fiberglass cloth Brush Denatured alcohol Clear polythene bag (plastic bag) Masking...

    0
  • 7

    How To Reinforce FiberFusion Motor Mount

    Introduction The stock motor mount is plenty strong. However, in instances where prop strikes are becoming frequent or when...

    0
  • 7

    How To Replace A Damaged Motor Mount

    This type of damage is not as bad as it seems and its quite repairable. These things happens for a...

    0
  • 7

    How To Rig Up Servo Solder On Servo Extension Cables

    Overview Here’s a simple way to rig up the solder-on lightweight servo extension cables for a neat installation and...

    2
  • 7

    How balancing cables are connected to Lipo Packs

    How balancing cables are connected to Lipo Packs   Due to the non-standardization of current lipo manufacturers, there is...

    1
  • 7

    Tips for Handling and Caring of Lithium Polymer Packs

    High Performance 3D/Freestyle flying requires four critical considerations for battery packs which are; consistent power throughout the entire duration...

    0
  • 7

    How To Assemble PA Z-Bend Pushrods

    Prior to strating on the assembly you need the following:- A pair of scissors disposable lighter Good quality thin...

    0
  • 7
    0
  • 7
    0
error: