Design and Production of High Quality R/C planes, since 2004
Note: High volume of orders and thorough quality inspection impact processing time, expect delays

Blog – Mini with right sidebar

  • export_order-2022_01_17-11_05_33-13747276.txt

    How To Replace A Damaged Motor Mount

    By aerofundan on 07/28/2016
    0

    This type of damage is not as bad as it seems and its quite repairable. These things happens for a number of reasons such as: 1.The use of excessive force...

  • export_order-2022_01_17-11_05_33-13747276.txt

    How To Rig Up Servo Solder On Servo Extension Cables

    By aerofundan on 07/28/2016
    2

    Overview Here’s a simple way to rig up the solder-on lightweight servo extension cables for a neat installation and to get rid of excess weight. Items Required. 18W Low...

  • export_order-2022_01_17-11_05_33-13747276.txt

    How balancing cables are connected to Lipo Packs

    By aerofundan on 07/28/2016
    1

    How balancing cables are connected to Lipo Packs   Due to the non-standardization of current lipo manufacturers, there is no universal form factor for the balancing plugs and this...

  • export_order-2022_01_17-11_05_33-13747276.txt

    Tips for Handling and Caring of Lithium Polymer Packs

    By aerofundan on 07/28/2016
    0

    High Performance 3D/Freestyle flying requires four critical considerations for battery packs which are; consistent power throughout the entire duration of the sequence, light enough to be within the prescribed...

  • export_order-2022_01_17-11_05_33-13747276.txt

    How To Assemble PA Z-Bend Pushrods

    By aerofundan on 07/28/2016
    1

    Prior to strating on the assembly you need the following:- A pair of scissors disposable lighter Good quality thin CA e.g. Zap Thin CA (Pink Bottle) Sand paper Step...

  • export_order-2022_01_17-11_05_33-13747276.txt
  • export_order-2022_01_17-11_05_33-13747276.txt
error: