Blog – Standard with no sidebars

High Performance 3D/Freestyle flying requires four critical considerations for battery packs which are; consistent power throughout the entire duration of the sequence, light enough to be within the prescribed AWT of the model to retain design flight characteristics, properly sized to accommodate the demands of the drive system and a long trouble free service life.   Lithium Polymer packs (Lipo)

Prior to strating on the assembly you need the following:- A pair of scissors disposable lighter Good quality thin CA e.g. Zap Thin CA (Pink Bottle) Sand paper Step 1. Lightly sand the end section of the CF pushrod along the area where the metal Z-bend would be glued to. (This provides a much stronger glue bond) Step 2. Take