Design and Production of High Quality R/C planes, since 2004

Blog – Masonry with no sidebars

  • wargoflighttips
    0
  • wargoflighttips

    Precision Aerobatics How to Build Series by Hans Kahlert

    Episode 1:   Introduction Episode 2:   In this Episode of PA Builds Hans’ covers servo installation and the building of...

    1
  • wargoflighttips

    How to Modify the Thrust 10 to Thrust 40 Motor for Back Mounting

    Overview Thrust motors can be modified for back mount operations if needed. Items required are as follows:- Stepped Wheel collar to...

    1
  • wargoflighttips

    How to Remove and Re-install the Thrust Motor Shaft

    Here are the step by step pictures on how to remove and replace the motor shaft. Tools required in preparation are...

    2
  • wargoflighttips

    How to Fix Landing Gear Mount after a Hard Landing

    You will need the following: 30 minute epoxy Fiberglass cloth Brush Denatured alcohol Clear polythene bag (plastic bag) Masking tape X-acto...

    0
  • wargoflighttips

    How To Reinforce FiberFusion Motor Mount

    Introduction The stock motor mount is plenty strong. However, in instances where prop strikes are becoming frequent or when flying on...

    0
  • wargoflighttips

    How To Replace A Damaged Motor Mount

    This type of damage is not as bad as it seems and its quite repairable. These things happens for a number of...

    0
  • wargoflighttips

    How To Rig Up Servo Solder On Servo Extension Cables

    Overview Here’s a simple way to rig up the solder-on lightweight servo extension cables for a neat installation and to get...

    2
  • wargoflighttips

    How balancing cables are connected to Lipo Packs

    How balancing cables are connected to Lipo Packs   Due to the non-standardization of current lipo manufacturers, there is no universal...

    1
error: