|teshiecat @ RCGroups|
|I maidened my blue KMX today… WOW!!!! what a beauty
I wasn’t prepared for how unbelievavbly stable, smooth, FLOATY, and precise the KMX is.. It really feels heaps different to the bandit.. SOOOOO much more of the big plane feel. I’ve only tried the 15×8 so far, and it’s great.. I wasn’t sure what to expect from the awesome 6s power train, but it felt perfectly suited and appropriate for the plane.. everything feels right about it.. very powerful and smooth.. it’s got a kind of low down power. i was expecting crazy high rpm or an intensitysort of like the bandit on 4s, but it’s got a lower down power kind of feel.. very very nice.. yet another example of the iPAs setup being so ‘integrated’ with the airfame.. it really is noticeable
I tested it on the bench last night and was drawing about 44A making 1002W if i remember right, with the nanotech 2200 6s 25c, and 1051W, 46A with the dualsky 35C 6s 2200.. man so efficient, should get a good 7 mins flight time for a good hard run.
anyway, I am COMPLETELY happy with this plane.. it is the BEST!! I’ve been flying the new 3dHS 40″ epp full-fuse edge 540 for the last month and been loving it, very agile and well-behaved.. but I think I’ll be putting it aside for this one.. it was like flying in slow motion today in the KMX at first!
rock solid upright harriers, hover and TR.. and that’s with the 15×8!! can’t wait to try the 16×6. and man this plane slows almost to a stop in high alpha.. rolling harriers look great with those huge wings rolling around rhythmically .
this is simple the best plane by far I’ve ever flown, apart from my addy x and bandit too of course
|menksters @ RCGroups|
|Maidened mine yesterday. Typical PA airframe. Perfection personified. I set my c.g. at 4.75. Hope everyone enjoys this model as much as I do. Best Regards, donnie|
|Brufli @ RCGroups|
|Put two test flights on mine this morning. Knife edge only needed 1 click of elevator mix. More responsive then my MX but yet seems to fly smoother. Looking forward to having more time to get comfortable with it. Put on two more flights today. I’m more impressed now then I was yesterday. Handles wind better than the X’tra MX.|
|I was really impressed, I have always like the Extra MX so did not have great expectations for the Katana thinking that the Extra could not be beaten, well how wrong was I! The Katana is incredibly accurate in flight, and super stable in all of the IMAC & 3D manoeuvres I could throw at it. Club members commented on how stable waterfalls and parachutes looked in caparison to there 100 & 150cc models! I need to fly it more to really push its boundary’s but so far it looks like another winner from PA.|
|D.B. Hooper @ RCGroups|
|This is a fantastic flying machine. Not even one click of trim adjustment made. I have around 15 flights on mine now. Loving it! Floats like a butterfly stings like a bee! Smoother than silk, more precise than a micrometer, hovers like a hummingbird, more powerful than a RC locomotive and looks good while doing it!
|demonGti @ RCGroups|
|I’m a very happy camper
Finished assembling my KMX “iPas Power” kit at 3am and flew the maiden this morning.
I chose to not install the VG’s from the bling kit, just to get a feel for the plane without any aerodynamic aids. The plane flies amazing as is so I can’t wait for next weekend when I have all the CF VG’s installed.
This is an amazing airframe. Thank you Shaun, this one is a definite keeper
|Flying the KMX is an extremely rewarding experience.
This model has a fantastically wide flight envelope; capable of flying perfect lines and also able to be an amazing 3D machine, yet carries plenty of momentum into high energy manoeuvres too.
The KMX also exhibits great manners; able to slow to crawl with no tendency to drop a wing.
Like all PA models, It is quick and easy to assemble and can be enjoyed by intermediate and advanced pilots alike.
It’s the perfect plane. I love it.
|rogersrick123 @ RCGroups|
|I just put my KMX together a few weeks ago with about 20 flights on her. I give this plane a 9 out of 10. Very high quality and a great flyer. Keep up the great work PA|
|3d extra time @ RCGroups|
|last weekend we had some great flights with our demo Katana MX
everyone on the field was so amazed about the nice flight characteristics of this beauty
|mrbeacham68 @ RCGroups|
|Well, Saturday was the big day – KMX maiden. For various reasons, such as I was feeling a bit under the weather and I’m a crap pilot compared to the majority on here, I kept things pretty sedate but nonetheless came away very very impressed.
There were two main things that struck me. Firstly the power! Or rather power to weight as the lightweight PA construction really makes a difference. The other thing was the amazing precision. I have a 48″ EF Edge 540 and that is very good at precision stuff and was the most precise plane I had by a mile when I got it. Until I got the Sebart Miss Wind pattern plane, that is, which is in another league as you would expect. I flew the Sebart and the KMX back to back on Saturday, and in the still conditions I swear there is very little in it for precision. I suspect the Sebart would win on a windier day, but even so to come anywhere near a pattern ship for precision is a remarkable achievement for something that is so 3D capable as well. The PA team did an amazing job.
|I had my first real go on the Katana MX as I didn’t actually get to fly the first one. It is amazing. The first thing I noticed was on full rudder deflection the Katana goes into a Knife Edge Loop. My Hobbyking Slick on full rudder deflection pulls incredibly hard to the canopy, kinda like it’s trying to commit plane suicide. I call it shit, I think others call it bad coupling. Anyway the Katana MXrocks.
|teshiecat @ RCGroups|
|I’m such a big fan of PA.. I’ve been flying for 18 months and had the huge fortune of flying their ‘next generation’ planes the whole time I’ve been learning aerobatics (for the last year).. 4 bandits on 4s, then 4 kmx’s since their release. plus an addiction & a couple of addy x’s along the way.. flying such precise, light, strong, well-behaved planes in the learning stage has helped my progress so much and given me confidence to no end.
the kmx is it for me though.. the ultimate airplane!!
|the planes you have created have allowed me to advance my skill level dramatically. Prior to purchasing the instructional videos, and the airplanes, I was a proficient flyer, but after, the results are dramatic. I fly your planes every morning for two hours. My club members are starting to purchase the planes as I have told them that each plane is a tool. They each excel in different areas so ya can’t just have one. Anyway, thanksagain for creating such amazing aircraft for us to fly. I’ve had a couple of tuff years personally, and having these planes challenge me every day has kept my spirits up and goals high…
THE GROUND IS THE LIMIT !!
|mulgaman @ RCGroups|
|Maidened last weekend and I have to say this is the best airframe I have ever flown! Smooth, locked in and a dream slow or fast. Snaps insane!|
|Andreas Heger @ RCGroups|
|AMAZING PLANE!!! – I own the yellow MKX like in the photo! – The best flyer I have ever owned, hands down – extremely precise even in very slow flight – The Vortex Gens are excellent!!!|
|Here’s the situation….,,
Fu$&@/ing PERFECT !!!!!!!
First flight, absolutely flawless.. Second flight adjusted rudder expo to 46, shifted CG back a hair with the batts, and added 8% throttle boost thru the throttle curve.. And every one cheered.. Thank you again for all of your help.. I’m speechless!
|jevery @ RCGroups|
|Shipping was timely and customer service was very good with my recent purchases with PA.|
|Wanted to thank everybody at Precision Aerobatics for getting my order out so fast and for the customer service that is great. I added to my order twice and the good people at PA dealt with me with in a patient and pleasant manner. The packing is top notch one of the best in the industry. Thanks again for the great experience.|
|Dennis A. Hobson|
|Dear Lady: this is just a simple letter of praise for Cheryl Widner at P.A. U.S.A. – I recently made an order of two electric RC planes and made a mistake in doing so!
Cheryl called me to verify this is what I wanted (it was not) she helped me get this order right and answered all of my questions and needs in such a courteous and professional manner, I felt this letter was in order! Not only do you sell the best model aircraft on the planet, you also have top notch employees and support crew like Cheryl !
Keep up the Good work,
|Many companies have support for e-mail questions. However, very few answer
in a timely, accurate fashion as you did.
This tells me that PA understands the value of good customer service. I will
definitely purchase my next aerobatics aircraft from PA.
|Thank you for your call back, and the time you spent with me today. If this plane fly as well as your customer service this will be my favorite plane. Customer service any more seems to lack politeness, concern and urgency. This is not the case with you are your company. This Hobby is my fun and release I appreciate your friendliness politeness concern and urgency. Thanks again and look forward to meeting you some day.
|Thanks so much! The service is just as brilliant as the plane it self!|
|Hello P.A. I would like to thank all of you Cheryl, Jim and Jerry and anyone else who works at P.A. For the customer service, you are so nice and accommodating. Very professional but like talking to a friend. Wanted to thank the guys for there shipping and packing well the packing is the best I have dealt with on-line, they do the little thing to keep your products safe like taping props to a piece of cardboard. Owe yeah they make Great planes to. Thanks again P.A. Richard R.|
|Paul Gunnar Strand, Norway|
|PA product is outstanding good and solid planes! (I have 4 Pa planes in my collection, and i’m very satisfied with their performance!)
|Flying Fiz @ RCGroups|
|WOW What a GREAT plane!!!
2 weeks back I got to maiden it in a super strong cross wind that was gusting – it made for an uncomfortable maiden. Only had two sort of scary flights and I didnt want to risk it anymore. Too much beauty and hard work. I didnt get any real feel for it except that it was super light in the air. So I’ve been waiting for some calmer conditions,,,,
Then I was flying last Sunday, I had a few planes with me and the wind calmed right down later in the afternoon. So I screwed in the wings, loaded in a couple of 3s packs and took to the skies. Holy Sh*t – what a plane, easily the most precise and responsive and yet easiest to fly plane I’ve ever taken to the skies with.
My first KE was so perfect and the plane just seemd to be locked in place, it didn’t move an inch for 100 metres – it felt like if I let go of the Tx it would just keep on flying a KE to the horizon! (oh BTW, don’t try that).
And then it just got better and better…. man this is one well engineered plane.
I know all you guys know this, but I just needed to tell someone, my wife doesn’t give a rats, I just get the…. “oh that’s nice honey I’m glad you enjoyed it”.
Now all I need is the 70″ version!!
|Robin W. Karlsen|
|Thank you for providing these great Precision Aerobatics airplanes to the world! Extremeflight, Pilot-Rc, Eflite, Aeroworks, Great Planes, Hangar 9 could go to bed and sleep, compared with the PA machines! I have never seen or flown a electric balsa/carbon plane with this kind of light weight and extreme durability as the PA planes! I’m on my third PA bird now (there will be a fourth), and the best so far. The Extra MX is amazing! It looks great and the performance is fantastic! The only thing I wish you could do to the Extra mx is to add carbonfiber in the front of the glasfiber cowling as you already have in the back, it cracks up really easily.
Again! The best electric flyng machine I’ve ever had.To everyone PA team – Thanks!Best regards,
|Thanks again Shaun – I’m also going to grab a blue addy x any day now.
Btw the KMX is just the best and most precise plane I’ve ever flown – just awesome.
|I maidened my KMX in 18mph gusts yesterday and it outshines every other plane in my 2 dozen+ collection.
Even in those winds, the KMX comes out of maneuvers on point so startlingly precise it was like a telepathic link. I became aware that I was unaware of my thumbs on the sticks. Things like vert snaps to hover, hammerheads, etc. draw themselves. High alpha horsing felt like I was cheating the laws of physics.
All other planes would fight and wallow in such wind, but the KMX was linked solid and fun.
I suspect some of our club members will be your future customers.
Thnx for the KMX, and your support.
I now try to decide which PA plane is next…
|Team Precision Aerobatics,
Today I had another “Precision Day”. Another amazing maiden and what I can tell is going to be a love affair with my new plane. After 25 years of building and flying about every kind of plane, I have now again topped them all. Two weeks ago, My new Ultimate AMR (my son and I both have one) surpassed my wildest expectations and I though it would be tough to beat. The Ultimate now has over 50 flights and the Katana has two. What strikes me the most is that in all of the materials you hand out, your sales process at the Toledo Weak Signal Show, and your manuals tell a story of “precision” that almost seems to good to be true. Well….you have another believer and promoter. I would love to help you in any way I can to promote the planes in my area. A few of our local hobby stores have yet to discover what the true value in your planes really is. Nothing I have ever flown compares in any way to these two great machines. I am going to stop with the praise right now because I will start to sound like a paid spokes person(Just a RC Pilot from Canton, Ohio)……..please feel free to add my comments to any materials or your website. You simply deserve this praise. My new Katana took off and needed one click of elevator trim and flew absolutely perfect…..I see why it was named Aerobat of The Year by Model Airplane News.
A special thanks to Cheryl Widner…she has been amazing to deal with and has taken great care of me…….
A special thanks to Shaun for working with your team to demand that these planes surpass anything I have ever flown…..it must take enormous amounts of research and work to create such wonderful machines…..
Shaun..now that my planes are “proven precision” I do have a few helpful suggestions if you would like to call me and discuss.
My hats off to all of you…….
|bought a purple Mini Katana around 2005 (I think) and it flies like it is lighter than air. I have had 2 incidences in my years of flying it that brought me down to earth and I now realize that Precisions Areobatics planes are infact not lighter than air but they do indeed fly better than any other plane on the market. After years of enjoying my Mini Katana I finally broke down and bought a big brother for my mini in the Katana MX. I really do not know why I waited so long because my new KMX flies even better than I ever would have imagined. It is so precise and does exactly what your fingers direct. Not only are the planes well designed and fly great butn the customer service is wonderful. Thanks Precision Aerobatics for a great experience.|
|I’m on my third PA plane and all I can say is that there is no other electric acft company at this level. The planes are hands down a work of art in building techniques and their performance is incredible!! I received a new Katana for Christmas and during the build I realized that the Vortex generators had accidentally not be sent with the package deal. I called and talked with Sheryl who took care of it immediately and hooked me up even when she was pulling her hair out preparing for the Ontario show. Thanks Sheryl. AA++ in my books guys. I always enjoy seeing what you guys come out with next. I would love to own at least one of each of PA’s planes.|
|Love my Ultimate and Katana MX. Both flies very light,slower and realy aerobatic.The fusion of carbon balsa is strong and light weight.Both flies really diffrent but really great !!! I’m really excited cause i’m in the assembly of XR52 and will fly it in about 1 week !! I have 20 years of experience in rc plane and never seen excellent planes like precision aerobatics…Look is very nice of all there planes.And i dont wan’t to buy other plane than precision aerobatics !! It’s comes a little bit expansive cause I’M from quebec but I Personaly think it’s worth the cost !!|
|I have a KMX. I started with foam 3D, then a cheap balsa 3D. When I got my KMX I could not believe how easy it is to land, how floaty it is and how straight stays in stalled maneuvers. I won’t bother with budget planes anymore. Waste of money.|
|My Katana MX is one of the most admired planes at the club and I love it. I believe the Precision Aerobatics’ Team has stepped up to the challenge. I have called to simply ask questions about the VOX prop’s and they have gone out of their way to get me answers. I plan to continue enjoying the products you provide for years to come. Thanks for doing it the “Right Way”!|
|I have been flying and teaching RC Flying now for over 22 years. I have built and everything from basic trainers to 100 plus mph pattern planes. My favorite planes are aerobats. Last year changed everything for me now that I have found my new friends at Precision Aerobatics. I have a Katana MX and two Ultimate AMRs. It is sad to say but the rest of my fleet of over 20 planes are now collectors items sitting and collecting dust. Both my son Scott and I met the wonderful Precision Aerobatics Team in Toledo at the Weak Signal Show…and at first the claims seemed too good to be true. To my surprise, the claims of these airplanes being far superior are absolutely true. I have over 100 flying hours on my PA planes and I cannot get enough of them and they have taken my flying to an entirely new level. Everyone who has watched me fly them have been blown away by their beauty and PRECISION Flying. They make flying far more enjoyable with their predictable behavior. Also, when I have had any questions, observations, or customer needs they have been met with superior customer service. Cheryl and Jim have become RC friends….Thank you to both of you. The Katana MX was named Aerobat of the Year because it simply is………|
|my katana is a pure pleasure to fly and it relaxes me every time. unlike other 3d type planes that only serve to frustrate the pilot with every move.
thanks for great planes keep up the good work.
|Excellent customer service and love the planes. From the time I purchased my Katana MX and XR-52, I’ve been impressed with how friendly and quick PA are to respond to my questions. For the customer service alone, PA have won a life long customer.|
|It’s hard to imagine a company being bold enough to call themselves “Precision” Aerobatics. Well you hit it right on the head. My two PA planes (Katana and Bandit) are the finest planes I have ever seen. The Bandit is sexy. When I walk on to the field carrying my Bandit, it’s like walking into a room with a beautiful woman. Sleek, and well put together. My club members actually gather around my Bandit and admire it. All of my future planes will be Precision Aerobatics, because I’m not rich, so I want to put my money into absolute quality.|
|Steve Shaw started my addiction with an extra 260. next i saw the addiction in a video and thought wow what an ugly plane. when i watched the video i bought one and then another. then the addy x came along . have had 6 of them. the addy xl have had 2 so far. also along the way i have had an extra mx a katana mx an ultimate and an electric shock.does anyone know of a group that can help with this sort of addiction? I just ordered a new Addy X today|
|I build these two IPA kits (Bandit and KMX) almost 18 months ago but only
started flying them now. Great birds.
You make really awesome models!