35% top quality ARF made of the finest raw materials. We use selected balsa & ply wood to match the weight and strength needs for this model. This plane is constructed using all new technologies, that gives excellent flight performance. All wooden parts are CNC laser cut with the highest accuracy.
To match our high standards the planes are built by experienced craftsmen who give great care to their construction.
Removable wings and stabilizers allow easy transportation (you don’t need a van or a truck - just tie the fuselage properly to the car racks. Contact us for advice).
With the new Extra 330L you can perform any 3D maneuvers you can dream of. Elevators, harriers, super-fast waterfalls, positive and inverted climbing flat spins, rock-solid hovers and torque rolls - if you can do it - the Extra can.
If this is your first giant you will be thrilled to see how easy it is to fly - so much easier than any small plane. The level of excitement when flying a plane like this is incomparable. It is pure fun.
Ready built balsa and plywood fuselage; two balsa sheeted plug in wings (fully constructed), stabilizer, rudder and vertical fin. Aluminum wing tube, aluminum landing gear pre painted white, pre-painted fiberglass cowl and wheel pants, tinted canopy, PA decals set.
Features:
- Fully laser cut constructed aircraft (include wings, stab and fin)
- Awesome TOC color scheme
- Tinted canopy
- All surfaces are pre drilled for pin hinges
- All control surfaces are double beveled for 3-D aerobatics
- Hard points are pre installed for control horns
- Fiberglass cowl and wheel pants
- servos are installed inside the stab in a linear movement of the servo arm (you don't see the servo)
- All control horns are carbon fiber fitted in slots (two for each servo capture ball links in the center).
- Tunnels for header and tuned pipes
- Tunnel for servo leads installed in wings
- Aluminum landing gear
- Quality Oracover/Ultracote covering applied
|
